Expert Answers about Volkswagen T2 Bus Van

• Minimum Clearance Between Crossbar and Roof to allow Yakima Skybox to Fit
• The Yakima SkyBox 12 Rooftop Cargo Box - 12 cu ft - Black Carbonite # Y07334 doesn't have a specific minimum clearance below the crossbars because each fit will be slightly different. My contact at Yakima estimates that the very minimum would be 2 inches between the bottom of the bar and the top of the roof, but to be safe you will want to consider 2-1/2 inches as the minimum so you can ensure the fit.
  view full answer...


• Color Options for Mini Fridge
• The Everchill RV Mini Refrigerator w/ Freezer- 1.6 Cu Ft - 115V, # 324-000110, is currently only available in black. We do carry the Everchill RV Wine Cooler, # 324-000115, at 3.2 Cu Ft also in black but with a glass door.
  view full answer...


• Recommended Roof Rack For 1973 Volkswagen T2 Van With Camper Top
• Thanks for the photo of your 1973 Volkswagen Van. We do have a roof rack that will work for your van. I recommend the SportRack Pop-Up Camper Roof Rack # SR1020. This roof rack is designed for campers that do not have rounded or curved edges. The length of the rack can be adjusted to 80, 83, or 86 inches long. The rack is permanently mounted to the roof of your van. This roof rack has a 200 lb weight capacity. The Thule rack you asked about is not a fit for your van roof. Then I recommend...
  view full answer...


• What is Diameter of End of Rightline Cable Lock # RL100640
• The end of the cable of the Rightline Roof Cargo Bag Lock # RL100640 is .68 of an inch which probably would fit through your Yakima bag but I am not sure which one you have so it's harder for me to speculate.
  view full answer...


• Replacement Cam Lock
• If you need a 5/8" thick cam lock, then the Camco Cam Lock - Straight or Offset - Thumb Operated, # CAM44333 should work for you.
  view full answer...


• Trailer Hitch Receiver Option For 1978 VW Bus
• Since there isn't any custom-fit trailer hitches for a 1978 VW Bus, what you'll need is a universal weld-on hitch. For that you just need to measure your frame width from outside to outside and if you need any specific drop for the receiver to clear the bumper. If your frame width is between 18 inches and 44 inches, you can choose from the Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop # 15902 or Curt Class V Universal Weld-on Receiver Hitch and Brackets...
  view full answer...